Iota Silicone Oil (Anhui) Co., Ltd
（IOTA-MF961 series）
Description：
IOTA-MF961 is a fluorosilicone silicone compound that is formed by thermal vulcanization after adding a vulcanizing agent (the vulcanizing agent is selected according to the process requirements).
Advantages: easy to process
Lower compression set
Good mechanical properties, high strength and resilience
Excellent oil resistance, solvent resistance and high and low temperature resistance
Product technical data：
|
ITEM |
index |
|
|
serial number |
IOTA-MF961 |
|
|
Test Methods测试方法 Appearance |
light yellow |
|
|
density/ g/cm3 |
ASTM D792 |
1.45 |
|
hardness/shoreA |
ASTM D2240 |
60 |
|
Tensile Strength/MPa |
ASTM D412 |
9 |
|
Elongation at break/% |
ASTM D412 |
298 |
|
Tear strength/KN/m |
ASTM D624-B |
20 |
|
compression permanent deformation（177℃*22h ） |
ASTM D395 |
10 |
|
Resilience/% |
ASTM D1054 |
27 |
|
*heat resistance 200℃×72h |
Hardness change (Shore A) |
+3 |
|
Tensile strength change rate,% |
-20 |
|
|
Elongation at break，% |
-20 |
|
|
Fuel C volume change rate/%25℃/72h |
ASTM D471 |
+20 |
|
vulcanization conditions |
Add 0.7 parts of Bi25, first-stage vulcanization: 170℃×15min, second-stage vulcanization: 200℃×4h |
|
*The data in the table are typical product performance and do not serve as factory standards.
*Meeting heat resistance requirements requires the addition of heat-resistant additives
Processing suggestions:
It is recommended to use 0.6 to 1 part of bis-penta-sulfide curing agent (2,5-dimethyl-2,5-bis(tert-butylperoxy)hexane).
Customers should determine the most appropriate vulcanization temperature and time based on product size and vulcanization method.
Application:
Can be used for molded products, injection molding and extruded tube forming products; has good mechanical properties
Product packaging: 20Kg per box
Storage period:
MF961 should be stored in the unopened original packaging below 40℃ for 12 months from the date of production.
